CAME VER KIT Manuale Utente Scaricare il pdf (Pagina 67)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Photo 9.11 Photo 9.12

Photo 9.13

As shown in photo 9.12, solder the 55 mm (red) piece

of wire to the center terminal of the toggle switch.

This is easiest if you apply solder first and then attach

the wire.

Photo 9.14

Photo 9.15

Remove the insulation from both ends of the 22 mm

red piece of wire, apply solder to them, and insert one

end into the battery snap as shown in photo 9.14.

22 mm wire (red)

Photo 9.16

65 mm Red

Black

As shown in photo 9.11, remove about 2 mm of

insulation from the end of the 65 mm (red) piece of

wire and solder together the places indicated by the

circles.

55 mm

Red 55 mm

65 mm Red

Red

Red 22 mm

Solder the other end of the 55 mm red piece of wire to

the battery snap as shown in photo 9.13.

Solder the end of the 22 mm wire to the battery snap

as shown in photo 9.15.

As shown in photo 9.16, solder the other end of the

22 mm (red) wire to a second battery snap.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 91 92

Nessun commento

CAME VER KIT Manuale Utente Pagina 67