CAME VER KIT Manuale Utente Scaricare il pdf (Pagina 29)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Photo 4.5

Photo 4.6

Each toggle switch is equipped with a flat washer to

prevent it from turning in the hole. This washer has a

protrusion to present turning.

When the toggle switch is mounted, the protrusion fits

into the indentation indicated by the circle in photo 4.5.

Photo 4.7

Photo 4.8

ames of parts

1: Nut

2: Shake-proof washer

3: Flat washer to prevent turning

4: Nut (not used)

Photo 4.9

Fit the flat washer to prevent turning onto the toggle

switch. Insert the toggle switch into the 6 mm diameter

hole drilled in the servo support plate, making sure that

the protrusion of the flat washer to prevent turning fits

into the groove in the plate, as shown in photo 4.9.

After checking, remove the toggle switch. Attach the

parts that came with it to the toggle switch so that they

won’t get lost.

Use a Stanley knife to cut grooves into the back of

the servo support plate.

The grooves look like this when finished.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

Nessun commento

CAME VER KIT Manuale Utente Pagina 29